- This topic has 2 replies, 3 voices, and was last updated 13 years, 2 months ago by
.
-
Posts
-
I have a Servis washing machine – model M6702BL – which after 5years and absolutely no problems suddenly stopped working in the middle of a wash.A local engineer has told me after checking everything,that the control card is at fault. I take it he means control module- can anyone verify that is the likely problem !
Re: servis washing machine
After that length of service, it could be motor-brushes, but you’d normally get erratic drum movements and “odd” sounding motor a while beforehand.
If the board is U/S you may have trouble sourcing one ,as i think Servis went bust a while since….you may be able to get a secondhand one from a scrapyard /appliance repairer/recycler/ site such as “freecycle”
Presume you already tried the “spares” facility linked on this site?Re: servis washing machine
If I was you I`d physically have a look at the module for relay cold solderings. The relays are the black square components. Also check the large module`s inductor coil- that is the component that is set in to a small black trough as they are known to break there- due to vibration over the years- given the weight of this component. Just an idea to try first.
- You must be logged in to reply to this topic.