servism9010w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › servism9010w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 27, 2007 at 4:41 pm #26176
    robbo1973
    Participant

    hi servis m9010w 20034708258 014077059 machine washes fine but then jumps to end missing rinse and spin. original board was sent to emw for burning on spades as normal but same fault.has been returned to emw but fault still there any ideas checked everything.

    March 27, 2007 at 6:25 pm #209047
    timdowning
    Participant

    Re: servism9010w

    Original board burnt.
    Recon Board skipping programmes.

    As you have checked everything i would say recon board faulty, or wiring incorrect, or poor connections. (did you change loom or individually spade wires?)

    Have you run it on its test programme???

    March 28, 2007 at 4:11 pm #209048
    robbo1973
    Participant

    Re: servism9010w

    sent recon board back once,crimped edge connectors tight changed individual spade connestors. what is the test programme how do you access this.

    March 28, 2007 at 6:08 pm #209049
    timdowning
    Participant

    Re: servism9010w

    You have PM.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.