SGV43A03GB/44 No water

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SGV43A03GB/44 No water

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 10, 2008 at 1:10 pm #36640
    MDE
    Participant

    When I turn on this D.Washer the pump runs,then there is a click in the PCB but no water going in and there is no neutral to aquastop,micro switches on pressure chamber are ok,so I suspect PCB .If any one knows any different I would be grateful for the help.

    Thanks Mark

    May 10, 2008 at 3:45 pm #251792
    gegsy
    Participant

    Re: SGV43A03GB/44 No water

    Hi
    Live feed from float switch (neutral from module.)
    Check the transfer tube and the usual for crud build up also 😉

    Greg

    May 10, 2008 at 10:13 pm #251793
    MDE
    Participant

    Thanks Greg, i have a live from float sw,but no neutral so module must be faulty.

    Mark.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.