Siemens Dishwasher Module – No Model no –

[grooster]

Hi,
Ive been out to an old customer today who has a 4ish year old siemens integrated dishwasher. The module has gone, no problem, until I look for the model number.
It not the etched in version and it looks like the sticker has worn away. Theres a mark on the inner left side where a sticker has been. Also the instruction booklet doesnt have the numbers either.
The only thing I could think of was to take the numbers off the module and see if anybody could identify it off these.

AKO 713514-02 Typ:J.1
PRG 713480-00 84 080124
BSH 9000.162.996 03312 01 NS

I know its a long shot but they are really good customers and have been with me since the start.
Really hope somebody can point me in the right direction.
Thanks as always
Nick

[Martin]

Re: Siemens Dishwasher Module – No Model no –

Are you sure it’s a Siemens as ALL Siemens Enr numbers are etched in the door?

[grooster]

Re: Siemens Dishwasher Module – No Model no –

Yep Martin, i’m 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} positive on this. Done BSH for last 22 years and this doesnt have the etching. I was suprised, but I have seen a few of the latest models with just stickers on them.

[Martin]

Re: Siemens Dishwasher Module – No Model no –

grooster wrote: I was suprised, but I have seen a few of the latest models with just stickers on them.

Talk about no paddle and creeks then eh? 😡

By any chance of a miracle I don’t suppose the customer has kept the installation instructions ( normally in a plastic bag with fixing screws, template and often as not a piece of paper with the Enr no. on it) have they? 😛

[grooster]

Re: Siemens Dishwasher Module – No Model no –

No all they have is the instruction booklet and its just a generic one that covers the range. It was installed by a kitchen company that has, as luck would have it, now gone out of business.
Its not looking good.

[Author]

Posts