Siemens dishwasher not finishing

[simtoms]

Been back to a Siemens SE25A090GB17 which goes through the cycle fine but when supposedly finished with display on ‘0’, still runs the circ motor although sump is drained (small amount of water still running out of spray arms). Been through pressure system, and now a bit stuck…
Anyone remember having this before please? Thanks. Simon.

[Martin]

Re: Siemens dishwasher not finishing

Whip the module out and take a look at the surface components.:wink:

My guess is that a triac has blown or some such? If so you’ll then need to locate the component that caused it to blow. 💡

[Author]

Posts