- This topic has 2 replies, 3 voices, and was last updated 6 years, 2 months ago by
.
-
Posts
-
Got a short to earth but for the life in me can not find.. Suspected power module as it does have a link to earth.. changed it but still have same fault? Can not find a fault with a component ie elements/fans/ntc/light etc. There are two boards on this oven 00651994 (changed) and 00656659 control module.
There is also a switch for the door but it is insulated and I am picking up 002mg ohm to earth via meggar
Anyone had the same thing I would appreciate help before I dive in further 🙁
Oscarwell I would
disconnect and isolate all elements then try again and see if it tripscheck lampholder as they have an earth connection
the last problem earth I had was a fan motor
also one of the problems with electronic board is they have suppression capacitors that are not rated for 500v
its unlikely to be the boards
Dave
- You must be logged in to reply to this topic.