Siemens Integrated Freezer Hinges

Home Forums Public Support Forums Help And Support Fridge And Freezer Forum Siemens Integrated Freezer Hinges

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #93139
    SurreyHugh
    Participant

    We have two Siemens fridges and a Siemens freezer, all integrated. Approx 3 years old, lightly used. The door panels on all three have gone out of alignment and now foul the cabinets when opened. It’s been suggested that this is likely to be hinge problems, despite the relative newness. Realignment doesn’t look a diy job for the inexperienced. Can’t see any identification on the actual hinges. Will buy new hinges if necessary but total cost is £250+ so want to be sure this is necessary. I’m not sure how to proceed, any suggestions please?

    #453323
    electrofix
    Moderator

    Re: Siemens Integrated Freezer Hinges

    if you want to post the complete Enr number so we can tell which unit you are talking about

    Dave

    #453324
    SurreyHugh
    Participant

    Re: Siemens Integrated Freezer Hinges

    Freezer ENR is GI18DA50GB/04
    Fridge #1 ENR is KI21RAD30/02
    Fridge #2 ENR is KU15RA51GB/03
    The first two are fixed inside cabinets, the third stands on the floor
    Location is Bristol.
    Hope this helps thanks Hugh

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.