- This topic has 0 replies, 1 voice, and was last updated 11 years, 9 months ago by
.
Viewing 1 post (of 1 total)
-
Posts
-
Hi.
Our fuse box tripped this morning whilst the machine was running. When I reactivated the machine began working again. But when I came back later in the afternoon the door was jammed shut which I though was because water might have become trapped in the machine. So I drained the machine and managed to open the door.
However the machine is not powering on. I have checked the fuse in the plug and sockets. I removed the top of the machine and can see with tester that there is power coming into the machine but no power signs are there near the front unit which powers the display. The on/off switch has been tried but not working.
Can anyone please help? Is there anything I can do?
Thanks
Sam
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.