siemens. no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens. no heat

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 19, 2016 at 2:57 pm #89638
    clockworkone
    Participant

    Siemens w/machine. wxl148auk/19. This machine is not heating. Tested ins and res on heater and all good. Could not test ntc as time didn’t allow to remove front. going back with ntc later. Checked wiring and board connectors. No fault codes showing. If not ntc I presume it will be board.

    October 19, 2016 at 3:14 pm #441956
    Martin
    Participant

    Re: siemens. no heat

    Certainly not the NTC and very likely the heater relay on the control unit PCB 🙁

    October 19, 2016 at 5:16 pm #441957
    clockworkone
    Participant

    Re: siemens. no heat

    Thank you Martin. I don’t think they will stand the cost of a new board. I will pull board out for a quick look.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.