Siemens SN26M830GB/25 aborts half way through

[allan73]

Hello all,
The above dishwasher aborts approx halfway through a cycle and has twice brought up an E14 error which I believe is a flow meter fault.
Qualtex have been unable to locate a flow meter on this machine for me and I’m wondering if anyone could shed any light on this ?
Allan.

[timdowning]

Re: Siemens SN26M830GB/25 aborts half way through

Have you been on Siemens spares site and looked at the exploded diagram for this model?

[Martin]

Re: Siemens SN26M830GB/25 aborts half way through

timdowning wrote:Have you been on Siemens spares site and looked at the exploded diagram for this model?

The thing is Tim that the Siemens site you refer to merely shows the exploded view and bugger all else. In truth it is pretty rubbish and only the official TRADE site is of any use.

The flow meter is built in to the water inlet matrix and only the reed switch is available as a spare part (00611317). Fitting instructions below…… 😀

[allan73]

Re: Siemens SN26M830GB/25 aborts half way through

Thanks Martin, you succeeded where Qualtex tech dept failed.
Allan

[allan73]

Re: Siemens SN26M830GB/25 aborts half way through

Is it common for the reed switch to fail part way into a cycle ?
Allan

[Author]

Posts