Siemens SN58302gb/11 D/W with no heat

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens SN58302gb/11 D/W with no heat

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 30, 2012 at 9:45 am #72798
    cornwell40
    Participant

    Got a call to this dishwasher, no heat on wash or dry cycle.
    Not seen this particular model before, so not quite sure where the electronics fit in, are they part of the NTC circuit?

    Tested the heater circuit through and all ok, stats and element fine. I’m presuming the sensing module(if thats what it is) has a fault as the NTC tests through(although again I don’t know its values).
    Anyone shed any light on this one as at 19 years old and the module (??)retailing at over £200 its looking like a write off.


    TC

    November 30, 2012 at 3:27 pm #385594
    Martin
    Participant

    Re: Siemens SN58302gb/11 D/W with no heat

    Broken wire in loom adjacent LH door hinge. 😡

    December 1, 2012 at 2:19 pm #385595
    cornwell40
    Participant

    Re: Siemens SN58302gb/11 D/W with no heat

    Checked the loom first, everything was fine. They have decided to go for a new one now due to the age 🙁

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.