Siemens washerdryer not drying

[DDDave]

Its a WXD1260GB/01. It heats and blows but there is no power to the condensor valve. Is this a board fault please ??

[Martin]

Re: Siemens washerdryer not drying

DDDave wrote:Its a WXD1260GB/01. It heats and blows but there is no power to the condensor valve. Is this a board fault please ??

Not necessarily as the board relies on a full circuit being created otherwise it won’t fill. It would normally throw up an error code though (F17?)

As a rule it’s the valve open circuit. Best solution (and cheapest) is to stick a new valve on and see.

[DDDave]

Re: Siemens washerdryer not drying

Thanks Martin. I will try that. It wasnt coming up with a fault code though thats why I thought it might be the board.

[nomadPaul]

Re: Siemens washerdryer not drying

I’m not 100 {e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but I think the condensor valve on these models may ‘cycle’ so not energize straight away but may take a few minutes to operate .

[DDDave]

Re: Siemens washerdryer not drying

Thanks Paul. I am calling to it in the morning so will put a valve in and leave it on test.

[Author]

Posts