- This topic has 2 replies, 2 voices, and was last updated 13 years, 8 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
How do I reset the error code on these models? I found the carbon brushes worn out, I’ve replaced them but I cannot get rid of the error code.
Any ideas?
Cheers PaulRe: Siemens wm14e141gb/09
close door – switch selector off – wait a couple of seconds – turn selector switch to position 8 ( bottom setting ) – hold spin speed button and turn selector switch one click clockwise (position 9) release spin speed button – error memory shows – reset switch selector back to off .
This should clear the error and release the machine .
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.