SIEMENS WM5487AGB/04

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SIEMENS WM5487AGB/04

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 2, 2007 at 11:21 am #27063
    hilly
    Participant

    SIEMENS WM5487AGB/04 FD8208
    When starting programe active light comes on, but during wash at different points it switches back to on. Doesn’t seemto put power to heater but everything else tests ok. A couple of times water level was higher than should be, could this be pcb.
    Any ideas
    paul

    May 2, 2007 at 5:04 pm #212474
    Martin
    Participant

    Re: SIEMENS WM5487AGB/04

    hilly wrote:Doesn’t seemto put power to heater but everything else tests ok

    Open circuit heating elements are a common fault with this series machines. Does the heater check out (you didn’t say?) 😕

    May 2, 2007 at 10:05 pm #212475
    hilly
    Participant

    Re: SIEMENS WM5487AGB/04

    yes sorry martin heater tests ok.

    paul

    May 7, 2007 at 3:27 pm #212476
    hilly
    Participant

    Re: SIEMENS WM5487AGB/04

    going back tomorrow to check ive not missed anything cos pcb quite pricey any more ideas b4 i go?


    paul 😕

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.