SIEMENS WXL142GB/08

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SIEMENS WXL142GB/08

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 3, 2009 at 8:35 am #46165
    trotter
    Participant

    G’day all 🙂

    I have a wonderful siemens WXL142GB/08 giving me a problem as follows……

    I select spin and display reads 11 mins remaining time, pump is activated until display reads 10 mins then a couple of drum rotations (Pause in between) down to nine mins then distribution speed from the motor.

    Next step is to go straight to one minute remaining!…..NO SPIN.

    I have checked wiring as much as poss and tried new brushes & a different motor (albeit the wrong one 😳 ) but each try produces the same results.

    Sounds like a control module? never come across this before so confirmation would be helpful MANY THANKS! 😀

    June 3, 2009 at 12:02 pm #288434
    Martin
    Participant

    Re: SIEMENS WXL142GB/08

    trotter wrote:Sounds like a control module? never come across this before so confirmation would be helpful MANY THANKS! 😀

    I wouldn’t mind betting the heater has an earth leak? If it has, it won’t spin. 😉

    Let us know how it turns out won’t you? 😀

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.