siemens wxlp145a dead

[dpr1974]

Evening, i have little experience with siemens/bosch w/m so some help please. the machine is completely dead, no lights, no noise. there’s power going in but that’s it.
i assume it’s the board and if it is, is there an usual suspect?

cheers.

[Martin]

Re: siemens wxlp145a dead

Take a close look at the control module. Check for surface damage and what caused it to fail if that’s the case. Nothing special with Siemens as they are just another machine that suffers failings like any other brand. See one, see them all. 😉

[dpr1974]

Re: siemens wxlp145a dead

I looked beforehand and nothing stood out. i was hopping that it might be a case of known fault and find it in the thread of pcb repairs, but no :(.
Thanks anyway.

[Author]

Posts