- This topic has 33 replies, 8 voices, and was last updated 18 years, 9 months ago by
.
-
Posts
-
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
can antone give a price for said beasty 816290672 smeg timer
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
connections have it as £102.27 trade
£141.38 retail
in stockRe: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Hi
Servevast have this as £120.32 retail + vat less trade discount (normally -15{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} but we will offer whitegoods users more – you can buy on-line at http://www.smeg-service.co.uk or email dean@smegdirect.comCheers
Derek, if you have to take the price offered by mdeang. This is the best you will get, providing your customer goes ahead. SMEG in geneal are a better product (I am biased though) than a lot of other makes. However you said they are @@@@@ m/c’s, remember we make our living on appliances that fail, we do not see the ones that dont.
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
thanks for that! its not that for all i know smeg are any worse or better than any other machines i have worked on but the few that i have done have always been strange faults and so dam Expensive to fix
and i thought the big z where bad
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Derek, maybe next time a Smeg customer calls you, dont take the call and advise them to contact someone who knows about this sort of product.
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Excuse me!! But I think I am quite capable of repairing a smeg dishwasher! I was asking if the machine had this as a common fault not how to repair it!! And thanks for all you help the machine is now working! After my being so clever to repair the pcb!! At component level!! and I will stand by my original statement!
EASTLMARK, I think that was uncalled for and not a sort of reply I would expect from you. Now if you was saying that to me I would understand it, I am a bit thick, but I put that down to my being a ripe ol age of @@@@@.
Any one who repairs a pcb down to component level has my respect anyday.
Oldtog
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Thanks oldtog! Yes to say the least I was a bit p**** off with that comment! But there you go!! To put you in the picture I found that the relay contacts had burnet out and where making contact occasionally! So I duly replaced the relay on the board and away she went runs like new now!
I would just like to thank you again for your help oldtog and the other people that gave me help and advice!
Your welcome Derek,
E-mail me with the details of where you purchased the relay + part number and price. I may buy a one or two, I don’t change many out of GT but it will make the difference of a completed job or not.
Oldtog
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
well I never, one set of relay contacts causing: no lights on pcb, no heat and no circulation…whatever next eh! and there was me thinking the only relay on that board was a heater relay….. I will also be very interested to find where you got these new relays from.
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Well I never also ❗ I think if you took the time to look at the wiring diagram!! mm :rolls: You would find that you where in fact so right that their is only one relay on that board but if you could also comprehend the fact that that one relay controls the heating circuit and if it does not come in will not bring the led for the fault on 😮 Funny that as I explained to OT!! I get faced with these small problems all the time working on gas turbines and 415vac plc equipment and all other electrical equipment offshore 😯 mm where easlmark we don’t have the luxury of going to our van and getting a board in and slaving it in to find out if our guess was Wright 😉 So if you would like to make any other derogatory comments please please bring it on! As I am more than qualified to repair what you seem to think is the white box with the internal workings of space shuttle inside it 😉
And obviously you’re not clever enough to repair boards or look up an electronics parts catalogues! I would suggest that you don’t know where to acquire electronic components as you will never make it work 😆
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
Oh well better off and get ready for the day!! I am off to price a job installing EX hazardous are equipment and plc controls for a major oil company today! Then I am way to fit a hvac control unit for a major hvac and refrigeration company! Then I think after that I will see what domestic appliances I can find that I cant fix no better still I will just go and fill out the test certificates I have still got to do for injection testing that I done yesterday :rolls: God why is everything so complicated 😉 what are you doing eastlmark?? 😉
Re: SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE
oh :rolls: for you that dont know 😉 EX hazardous area equipment (electrical installations and service) is very very complicated with so much legislation covering it you would not believe and funnily enough you have to be a qualified electrician to do the work with a certificate it’s slightly harder than fixing a domestic appliance! God what ever next eh!!
- The topic ‘SMEG BUILT IN DISHWASHER HELP!!! REQ PLEASE’ is closed to new replies.