Smeg DI6012-1 cover door fitting

[sir blobeth]

Hi all,
I’m sure this is a common problem.
I have bought a new decorative/cover door for this integrated dishwasher.

But I don’t have any template or measurements for drilling the 4 holes needed to hang the door straight.

I can try to take the measurements from the old door but I’d prefer a more accurate way of measuring. The door cost £40 !

Any ideas where I can get a template, or the best way to do this. The instruction manual doesn’t give a clue,

Any ideas.

thank you

[don]

Re: Smeg DI6012-1 cover door fitting

Hi

The installation instructions and the template can be found on the Smeg site here downloadable as well 🙂

Don

[sir blobeth]

Re: Smeg DI6012-1 cover door fitting

Hi Don,

thanks for your reply,

sadly the link only allows me to download the user manual which doesn’t have any help regarding the cover door fitting. 🙁

regards

[don]

Re: Smeg DI6012-1 cover door fitting

Hi

Here you go straight from the Smeg site 🙂

Don

[sir blobeth]

Re: Smeg DI6012-1 cover door fitting

Hi Don,

thanks again, I don’t know how I couldn’t find it.

Having looked at the instructions I now see that the original Currys Knowhow team didn’t use the brackets provided. They just stuck 4 screws through from the back.

They didn’t leave the brackets either so I have to buy them from somewhere.

cheers

[Author]

Posts