Smeg DWF 64SSE Dishwasher

[Lawrence]

Hi
m/c does fill set up then goes into fault code mode leaving two static lit
indicators on the left but this is not a fault code.
Smeg suggest a short somewhere and to check every component thats inline with the programmer 😯 .
Just wondered if anyone else had come across anything similar
Lawrence

[Dave_Conway]

Re: Smeg DWF 64SSE Dishwasher

If the dishwasher is less than 12 months old I would stick a new PCB in it TBH, it’s more likely the fault lies there than anywhere else.

All the other components are checked for faults by the PCB anyway to a certain extent and would give a “real” error code.

Dave.

[Lawrence]

Re: Smeg DWF 64SSE Dishwasher

Thanks Dave
Its a Cash call at 18 mths old so cust not happy,Its also this rotary dial selector thing with 2 PCB’S
But I think the customer is going to yell at Smeg so we shall see

Lawrence

[Lawrence]

Re: Smeg DWF 64SSE Dishwasher

Well to tie this one up ~The customer yelled at smeg and got the parts FOC ,It was the PCB (Good call Dave )
So everyones happy

Lawrence

[Author]

Posts