SMEG SUK60MFX1 dial photo anyone?

Home Forums Public Support Forums Help And Support Cooker And Oven Forum SMEG SUK60MFX1 dial photo anyone?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #63296
    sleepyhappy
    Participant

    HI there,

    I have a SMEG SUK 60MFX1 cooker, and the symbols around the main operating dials have worn away. We are leaving the cooker as part of our house sale, and the purshasers have been a nightmare to say the least, so I wanted to try and get a picture of the symbols for them – does anyone have one of these cookers and could take a photo of the main operating panel?

    Thanks in advance

    #353351
    don
    Moderator

    Re: SMEG SUK60MFX1 dial photo anyone?

    Hi

    There is a download available here on the Smeg site. I found that by entering SUK60 and then select the X version you can download the English version which can be printed off.

    HTH 😀

    Don

    #353352
    sleepyhappy
    Participant

    Re: SMEG SUK60MFX1 dial photo anyone?

    Thanks Don,

    That seems to be the manual we have, but irritatingly it doesn’t include a picture or diagram of the dials, its much less specific than we need. In fact none of the diagrams of the control panel seem to match the one we have…..

    Ive emailed SMEG, but havent heard anything from them. I think our best bet might be if someone has one of these and could take a photo, but its a long shot!

    I can vaguely remember what most of the setting points around the dial do, but not all. Just hope the buyers arent going to be a nightmare – they wanted to deduct £1000 from the purchase price because the fan wasnt working 😕

    #353353
    don
    Moderator

    Re: SMEG SUK60MFX1 dial photo anyone?

    You could make up your own diagram by identifying the control layout you have on pages 20 and 21 then using the control descriptions on page 6.

    HTH 😀

    Don

    #353354
    sleepyhappy
    Participant

    Re: SMEG SUK60MFX1 dial photo anyone?

    hmm, good idea, will have a go……

    Thank you!

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.