- This topic has 1 reply, 2 voices, and was last updated 13 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Good morning
I have a Smeg Suk91mfx I’ve replaced both fan elements and when it gets up to about 180 it trips the mcb. It will grill with fan,grill only and heat bottom element with fan and bottom element only this does not trip out. The elements have been dried so I don’t think it’s that.
What I’ve done
1. Replaced both fan elements.
2. Taken back off checked all visible wires.
3. Had various elements plugged in on there own it only trips with fan elements after about 10min of heating.
4. Made sure all main connections are nice and tight.Any ideas?
Charlie
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.