SR-S2028CVW Samsung f/f Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › SR-S2028CVW Samsung f/f This topic has 2 replies, 3 voices, and was last updated 18 years, 2 months ago by chichele. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts February 6, 2008 at 11:56 am #34373 chicheleParticipant Anyone got any advice?? Appliance runs ok for about first 6 hours or so but then unit stops running and freezer door light and temp warning lamp come on and thats it unless you turn off at mains and start again, pcb replaced – heaters-ntc,seem to read ok Ian February 6, 2008 at 12:16 pm #242357 wrayParticipant Re: SR-S2028CVW Samsung f/f hi its normally one of the defrost heaters at fault or the sticky drain heater that causes this fault many thanks February 6, 2008 at 12:19 pm #242358 bazza500Participant Re: SR-S2028CVW Samsung f/f Remember and disconnect the plug that joins the heaters together before measuring or you get a reading through the parallel path. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In