Still a nice little earner.

[iadom]

I know that Mark will turn his nose up but I have two bearing jobs and a complete drum rear half to do on three ISE, CI555WH’s this week, All fully chargeable, luvvly jubbly. . 8)

The one that needs the rear half has a big crack at the side of the rear bearing and has thrown the belt off.

Jim.

[EFS]

Re: Still a nice little earner.

Just out of interest how much for the parts?

Steve.

[iadom]

Re: Still a nice little earner.

Available in the shop/store here, although I buy the drum gasket elsewhere. 😉

Drum rear is cheaper at MP but is out of stock. 😥
Jim.

[EFS]

Re: Still a nice little earner.

Reasonable price for a heavy lump.

Tub half that is 😆

Steve

[eastlmark]

Re: Still a nice little earner.

iadom wrote:I know that Mark will turn his nose up but I have two bearing jobs and a complete drum rear half to do on three ISE, CI555WH’s this week, All fully chargeable, luvvly jubbly. . 8)

The one that needs the rear half has a big crack at the side of the rear bearing and has thrown the belt off.

Jim.

turn me nose up? wouldn’t have time, could have done 2 Bosch carbons and 3 smeg fan elements in the time to do one of those jobs. have fun getting the heaters back in!

[iadom]

Re: Still a nice little earner.

I leave the heater in place when doing a bearing change, always found the bearings easy to knock out on these. 8)

It’s only just over an hour of a job anyway. 😛

[Author]

Posts