Stoves Q600 DW – Low Pressure

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Stoves Q600 DW – Low Pressure

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 28, 2008 at 4:28 pm #40571
    Flopski
    Participant

    Have an old Stoves Dishwaher (Q600 DW) which has worked ok for years. Have been getting increasing amount of low pressure warnings (E2). Set the dishwasher to low pressure setting and this seemed to workfor a while. Now is getting the error message after about 3-4 minutes on any setting. Water pressure is low in the area but has n’t caused a problem until now. Have thought about getting new dishwasher but don’t want to throw this out if there is a potential quick fix.

    October 28, 2008 at 8:43 pm #266860
    Penguin45
    Participant

    Re: Stoves Q600 DW – Low Pressure

    Inlet valve filter clogging up?

    Penguin45.

    October 28, 2008 at 10:14 pm #266861
    Flopski
    Participant

    Re: Stoves Q600 DW – Low Pressure

    Undid the inlet tap under sink and checked for clogging, nothing there. Is there a filter in the dish washer?

    October 28, 2008 at 10:15 pm #266862
    Penguin45
    Participant

    Re: Stoves Q600 DW – Low Pressure

    In the inlet of the inlet valve.

    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.