Strange Bosch faults

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Strange Bosch faults

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 29, 2023 at 11:36 pm #102055
    iadom
    Moderator

    This is a friends machine, confusing fault details. Firstly intermittent spin. Now display is coming on randomly. Then programme aborts half way through, mentions P or locked in display or something. Is this a Chinese made appliance?
    ENR: WAJ28008GB/02 , FD 0007

    June 30, 2023 at 8:53 am #487382
    electrofix
    Moderator

    dont think its a chinese one

    not very old is it

    have you checked for loose connections. waggle plugs and see if display goes on and off. was thinking poss solder joint on the board plugs

    Dave

    June 30, 2023 at 9:43 am #487383
    iadom
    Moderator

    Morning Dave, not been out to it, just getting this info second hand via WhatsApp.:( How old is it with that FD number?

    June 30, 2023 at 9:51 am #487384
    electrofix
    Moderator

    00 + 20 = 2020

    07 july

    Dave

    June 30, 2023 at 9:58 am #487385
    iadom
    Moderator

    Thanks Dave.

    July 1, 2023 at 7:22 am #487386
    kaibart
    Moderator

    I would check wiring to operating module and if that’s ok probably a fault on the power module,

    July 1, 2023 at 9:15 am #487387
    iadom
    Moderator

    He’s informed me it has started working again after being left overnight. Will check those out if I do have to make a visit.:)

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.