Swan SW2010W

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Swan SW2010W

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 13, 2014 at 9:22 pm #79942
    rikasuzy
    Participant

    OH no not another Swan SW2010W. Can anyone help with the following problems.
    1. No hot water.
    2.Stops on cycles after initial fill and then red light flashes and does nothing.
    3.Spin cycle starts some water expelled turns slowly and continues to try to drain however no water comes out this just continues with no spin.
    Help!!! Please

    March 13, 2014 at 9:32 pm #411132
    Jackal
    Participant

    Re: Swan SW2010W

    What do you mean by no hot water?

    Filling then stopping an the fault indicator suggest heater / NTC are faulty

    No drain indicates pump failure or blockage

    You need to investigate the basics and come back with your findings

    Jackal

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.