Teka Dishwasher.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Teka Dishwasher.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 3, 2008 at 6:47 pm #35015
    Madmac
    Participant

    Going to this integrated beauty tomorrow . Mod no is UN DW 655F1, according to its owner. Not sure ive had the pleasure of one of these before. Im guessing its some chinese bundle o fun. :eeek: Anyway, cust reports it simply wont finish prog, goes for hours she says. She recons it is heating. Anyone got any ideas, ? . thanks.

    March 3, 2008 at 8:03 pm #244800
    Penguin45
    Participant

    Re: Teka Dishwasher.

    Stick it in google and the results are all in Chinese…….

    Chris.

    March 3, 2008 at 8:07 pm #244801
    Madmac
    Participant

    Re: Teka Dishwasher.

    Right, im not goin :sadder:

    March 3, 2008 at 8:07 pm #244802
    Penguin45
    Participant

    Re: Teka Dishwasher.

    You do right……. 😀

    :p45:

    March 4, 2008 at 2:57 pm #244803
    robbra
    Participant

    Re: Teka Dishwasher.

    Hi,
    Actually its an Indesit, just went to one last week.
    Rob

    March 4, 2008 at 6:28 pm #244804
    Madmac
    Participant

    Re: Teka Dishwasher.

    Went to this thing today,didnt recognise it as a merloni but havnt being going to much merloni lately..for obvious reasons.. Checked pcb for poor edge connectors, looked ok. Bit the bullet and dragged it out over the thickly tiled floor with usual hassle & swearing. Thermistor reading about 11k falling steadily to zero when dipped into cup of recently boiler water. Dunno if thats normal spec. Think it could be more hassle than its worth but hate anything beating me 😥 Well, if anyone comes across a similar fault would be interested in what you find, Eddie.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.