TEKA DW655 Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › TEKA DW655 This topic has 3 replies, 4 voices, and was last updated 17 years, 6 months ago by MC. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts September 24, 2008 at 3:36 pm #39719 MCParticipant no green lights on the control programme panel . its not selecting any programmes. any ideas? p.s. ( i have tried a new control panel and leds, but no joy. unless new panel is faulty). September 24, 2008 at 4:00 pm #263332 iadomModerator Re: TEKA DW655 Please don’t post individual queries as a Sticky.. If everyone did that the top of the forum would soon become clogged with them. By all means ‘bump’ your thread if you don’t get any answers. 🙂 I have unstuck it. Jim. September 24, 2008 at 7:42 pm #263333 MadmacParticipant Re: TEKA DW655 Have you had a really good look at door sw? replace or pop cover off & take a peek, contacts seem prone to carbon build up. September 24, 2008 at 8:59 pm #263334 MARIOParticipant Re: TEKA DW655 Circulation pump probably had water in it disconnect and you will find you can now select programs change motor Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In