THOMPSON TWIN TUB X10/1

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › THOMPSON TWIN TUB X10/1

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 29, 2008 at 9:54 pm #38397
    Minge
    Participant

    Hey!!
    I have this thompson twin tub and the internal fuse has blown…
    it megas straight down to earth when either the wash or spin timer is activated, it doesnt matter which one… either or.

    I am suspecting the capacitor because i assume if it was a motor it would only be down when one the timer for that motor selected??

    There is no terminal block… all wires are connected together so unable to test properly without cutting all the wires… MISSION!!! Has anybody worked on these before please? ❓

    July 29, 2008 at 11:19 pm #258746
    Penguin45
    Participant

    Re: THOMPSON TWIN TUB X10/1

    Chinese………. I *think* Qualtex had spares.

    Chris.

    July 30, 2008 at 6:32 pm #258747
    silverbroom
    Participant

    Re: THOMPSON TWIN TUB X10/1

    Hi Minge,
    Yes they are Chinese, have never repaired them but this company sell and repair them tel 01382 619353 they also sell ISE machines so must be a member of UKW.

    silverbroom

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.