Tumble Dryer Wiring

[stender]

Hi All, I have changed the heating unit on my hotpoint tvf770 but when going to plug the connectors into the unit have found that i didnt know where to plug the red and black power connector. I wrongly assumed it would be one way andplace but there are a couple of green circuit board locations. I took a guess and it tripped the electric. I then turned it around the other way and the dryer started ok but when i returned it was flashing all lights with a F10 fault and it hadn’t got hot. I then removed it again and not sure now where to connect it to. I’m also hoping I havent blown anything else. I cant find a picture of the connections anywhere.

[iadom]

F10 is an open circuit in the heater common wiring.

Check module connector J4;
• Check wiring between module connector J4 and the heater;
• Test heater elements.

Sadly it points to a blown module. 🙁

[Author]

Posts