Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Two Bosch parts queries
- This topic has 12 replies, 5 voices, and was last updated 14 years, 5 months ago by
iadom.
-
AuthorPosts
-
November 7, 2011 at 5:24 pm #66137
iadom
ModeratorModel/Enr WIS24140GB/20 the Bosch spares site doesn’t appear to list any parts other than a few accessories for this machine, part number for drain pump required please.
Model/Enr WFT2800GB/13. Is there a motor end cap for this machine or is it motor only?
TIA.
Jim.
November 7, 2011 at 6:21 pm #363202BobHope
ParticipantRe: Two Bosch parts queries
pump and filter assembly part number 144617
looks like a complete motor only part number 140867
Bob.
November 7, 2011 at 6:27 pm #363203iadom
ModeratorRe: Two Bosch parts queries
Cheers Bob,
How did you find the pump part number, the Bosch eSpares site doesn’t show any parts for the WIS24140 range apart from a few bits & bobs?
Jim.
November 7, 2011 at 6:44 pm #363204BobHope
ParticipantRe: Two Bosch parts queries
from tradeplace.
Bob.
November 8, 2011 at 8:01 am #363205eastlmark
ModeratorRe: Two Bosch parts queries
shows all parts for me on quickfinder Jim, I thought E shop finished a couple of months back?
November 8, 2011 at 9:50 am #363206iadom
ModeratorRe: Two Bosch parts queries
eShop or whatever its called now, its not showing the full details if I go via the Bosch homepage????
Do you have a link for Quickfinder Mark?
TIA.
Jim.
November 8, 2011 at 11:23 am #363207don
ModeratorRe: Two Bosch parts queries
You will need an account Jim to access B/S/H spares as it’s login and password protected.
DonNovember 8, 2011 at 11:26 am #363208iadom
ModeratorRe: Two Bosch parts queries
Thanks Don, I suspected as much. 🙁
Jim.
November 8, 2011 at 5:11 pm #363209Martin
ParticipantRe: Two Bosch parts queries
Not got an account with BSH then Jim? How on earth do you obtain ALL genuine parts then?
November 8, 2011 at 5:24 pm #363210iadom
ModeratorRe: Two Bosch parts queries
Masterpart ( with care 😉 ) DS Supplies Stoke.
I did apply for an account about 18 months ago but the website screwed up and every time I have applied since my e-mail addy gets rejected.
Do you have a link where I can re apply, it might be fixed with the recent upgrades to their web site.
Going back to the original topic, I have just stripped the old motor (£199.00 :eeek: ) and have replaced the carbons, it looks fine, good readings so going back in the morning to give it a whirl. 8)
Jim.
November 8, 2011 at 6:20 pm #363211eastlmark
ModeratorRe: Two Bosch parts queries
Those end caps are avaialable but never show up on the parts list, a quick call to BSH ap care usually comes up with the number.
November 9, 2011 at 8:45 am #363212don
ModeratorRe: Two Bosch parts queries
iadom wrote:Do you have a link where I can re apply, it might be fixed with the recent upgrades to their web site.
Jim.
Here you go Jim BSH application.Don
November 9, 2011 at 9:31 am #363213iadom
ModeratorRe: Two Bosch parts queries
Muchos gracias Don. 8)
-
AuthorPosts
- You must be logged in to reply to this topic.
