VTD00P

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › VTD00P

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • July 31, 2009 at 9:54 am #47471
    Kez
    Participant

    Can anyone advise if there is a conversion / alteration kit available for this model, to prevent the drum catching on the back panel? We have fitted a shaft repair kit but it still catches. Any help would be welcome! Kez

    July 31, 2009 at 10:01 am #293584
    bazza500
    Participant

    Re: VTD00P

    You need to replace the drum with a modified one.

    July 31, 2009 at 10:19 am #293585
    Kez
    Participant

    Re: VTD00P

    I understand there’s a modified one, but this particular job is very tight on price. I wondered if there was any other way? Do you know the part number for the modified drum at all? Thanks Kez

    July 31, 2009 at 10:39 am #293586
    bazza500
    Participant

    Re: VTD00P

    http://www.ukwhitegoods.co.uk/modules.p … ng&start=0

    have a read here..

    July 31, 2009 at 9:33 pm #293587
    helo_75
    Participant

    put a shaft kit on it, pack it out at the back with washers, cut and put the felt seal over where it looks like its been scraping.

    only way youll save money

    might even work

    August 4, 2009 at 6:54 pm #293588
    pmb
    Participant

    Re: VTD00P

    The foam rear sealing ring in shaft kit 00113038 is thicker and pushes drum away from back plate I allways change it, I carry a chisle on van to scrap old one off.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.