- This topic has 1 reply, 2 voices, and was last updated 17 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Machine not filling for rinses.
The drain valve would not close due to the motor unit and valve shaft not connecting. I repaired this fault and the machine fills washes and drains for the prewash and main wash, then after the main wash drain the machine does not fill. Machine halts. Three red LED’s on internal board are flashing (together) approx 1sec intervals. Any ideas please ❓
Re: Wascator W375H Prod 987760 020 6
Have a look at this
http://www.laundrysystems.electrolux.co.uk/node324.asp
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.