Washer takes water and then pump out UPO 624D

[vito]

Takes water display shows time like 1:20h drum dont cycle and then washer waits about 2 minutes and pump water out and display says finished. Carbon brushes are fine.

http://www.upo.fi/_images/products/imag … i_624D.jpg

[suedehead1]

Re: Washer takes water and then pump out

is that a haier?

[vito]

Re: Washer takes water and then pump out

Its UPO but i dont know who is the real manufacter.

[vito]

Re: Washer takes water and then pump out

Take just water and drum not turn at all, 2 minutes goes to timer and then pumps water out and display says finished.

[gandh1]

Re: Washer takes water and then pump out

suedehead1 wrote:is that a haier?

no idea, the PESUKARHU 6680 D looks like a servis…

on teh model/serial no. & rating plate sticker is there any information as to where it was produced? i.e made in… eu/italy/sweden/prc etc ?

[vito]

Re: Washer takes water and then pump out

Its made in italy.

[don]

Re: Washer takes water and then pump out

Moved to the European forum 😉

According to vito`s previous posts it`s a Upo Maxi 510, looks like it`s a Finnish brand produced around Europe.

Don

[vito]

Re: Washer takes water and then pump out UPO 624D

Is anybody idea what might be a problem. I have checked brushes and they are fine..

Im thinking motor or program card..

[Author]

Posts