Water inlet valves

Home Forums General Trade Forum Water inlet valves

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #58426
    IP
    Participant

    Small question, have any of you heard about a problem where the household water pressure is too high ??? been given this answer from a “Service Group” for the reason why a dishwasher is letting in water whilst its switched off, as the customers household water pressure is too high ?
    Customer recons there pressure is not high, if anything its a little lower then normal.
    Not heard that before, have any of you guys ?

    #334517
    cornwell40
    Participant

    Re: Water inlet valves

    I was always of the impression that if the pressure was very low the valve would not close fully and let water in. Other than that knackered poorly seated ones will do it.


    TC

    #334518
    IP
    Participant

    Re: Water inlet valves

    thats what i thought
    thanks, thats confirmed it 🙂

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.