WDG6340

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › WDG6340

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 29, 2011 at 7:01 pm #61949
    lallen63
    Participant

    My whirlpool dishwasher is not completing cycle.

    Tested on the 70 degree cycle.

    I can hear it filling with water, it releases the tablet and then stop after about 15 mins and the green light flashes four times.

    March 29, 2011 at 7:02 pm #348136
    lallen63
    Participant

    Re: WDG6340

    Sorry sent to soon – meant to say your assistance will be kindly received.

    Many thanks.

    March 29, 2011 at 7:11 pm #348137
    kwatt
    Keymaster

    Re: WDG6340

    Hi,

    From what I can see it’s a failure to drain if it’s four flashes but that doesn’t sound right from what’s described. 😕

    K.

    March 29, 2011 at 7:29 pm #348138
    lallen63
    Participant

    Re: WDG6340

    Thanks for your reply… the water is being drained out of the machine but have cleared out all the filter etc in case.

    Your help is appreciated.

    April 11, 2011 at 9:50 am #348139
    lallen63
    Participant

    Re: WDG6340

    Turned out it was the PCB board so at over £200 to fit I opted for a new dishwasher!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.