WFO 2466gb/07 Blowing circuit 15 min into wash cycle,

[Johnnyboy]

Motor and heater all checked ok blowing circuit 15 min into wash cycle,tested on 30deg cycle arrrghhh PCB NTC door interlock seem ok anyone similar
cheers Johnnyboy

[Martin]

Re: WFO 2466gb/07 Blowing circuit 15 min into wash cycle,

3 possible reasons for this : Heater, Heater or Heater. Replacing the heater will cure the problem. 😉

[Phidom]

Re: WFO 2466gb/07 Blowing circuit 15 min into wash cycle,

You could run it with the heater disconnected just to make sure.

[Martin]

Re: WFO 2466gb/07 Blowing circuit 15 min into wash cycle,

Phidom wrote:You could run it with the heater disconnected just to make sure.

But that would involve releasing the door boot to force your hand in to disconnect the wires, refitting the door boot then sitting around watching the drum go round and round for 20 minutes or even longer waiting to see what happens?

I’d go for the 10 minutes (maximum) option of whipping the front panel off and sticking in a new HTR72 and be done. 🙂

[Author]

Posts