Whirlpool 7550 wont wash

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool 7550 wont wash

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 13, 2010 at 6:24 pm #55214
    Nickelarse
    Participant

    Hi,
    My Whirlpool 7550 dishwasher hasnt been used for a few months but was fine last time it was used. Now it fills and after about 20 secs it beeps and flashes 11 times then pauses, then another 11 flashes etc. The machine empties and goes into rinse mode, regardless of what cylce was chosen. It continues to beep till switched off. I have tried a reset but to no avail. Any ideas anyone please? Thx Nick.

    June 18, 2010 at 12:03 am #322323
    Penguin45
    Participant

    Re: Whirlpool 7550 wont wash

    Water level issue. Check that the black grid in the sump is not full of fatty deposits, thus jamming its operation. It’s a twist fit from undeneath if serious cleaning is required.

    Power off first.

    Penguin45.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.