Whirlpool ADG 6340 fault

[zipeee]

Hello,

The Dishwasher is attached to the same line as the Sink/Garbage disposer, and that was clogged last week. The plumber came out and unclogged the line, but now the dishwasher is flashing 2 short on, 1 long off–it starts to drain for 15 seconds or so then it cuts off. How do I reset this fault code, or is there something else I should try to clear additional blockage?

[Penguin45]

Re: Whirlpool ADG 6340 fault

The base under the machine has flooded and the flood protection float switch has been activated. Machine should reset after the base has been drained.

The usual culprit is this:
http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159

Power off if you are going to attempt to drain it.

Regards,
Penguin45

[Author]

Posts