Whirlpool ADG 934 wh/3

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADG 934 wh/3

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • June 28, 2006 at 8:01 am #18762
    maltheviking
    Participant

    Bit of a problem this one. 😕
    Machine runs fine through a test prog, run it on a normal programme and after filling up and starting goes into error, the start indicator flashes continously. I have checked most of the components, all seem ok. Any ideas?

    June 28, 2006 at 8:21 am #180285
    Dave_Conway
    Participant

    Re: Whirlpool ADG 934 wh/3

    The NTC would be my guess, it seems to be the single most common failure on these. Although why the test cycle doesn’t pick it up is a bit odd 😕

    Dave.

    June 28, 2006 at 8:45 am #180286
    gegsy
    Participant

    Re: Whirlpool ADG 934 wh/3

    Thats what I thought until I couldn’t find NTC on diagram or listings 😕
    Do you have the 12 digit NC number please Malt.

    Greg

    June 28, 2006 at 8:56 am #180287
    maltheviking
    Participant

    Re: Whirlpool ADG 934 wh/3

    gegsy wrote:
    Do you have the 12 digit NC number please Malt.

    Greg

    854293415010

    June 28, 2006 at 9:00 am #180288
    gegsy
    Participant

    Re: Whirlpool ADG 934 wh/3

    Cheers Malt
    Feeler NTC p/n – 481228268035

    Greg

    June 28, 2006 at 9:00 am #180289
    Dave_Conway
    Participant

    Re: Whirlpool ADG 934 wh/3

    NTC part number 4812 282 68035 (the usual one) 😀

    Dave.

    June 28, 2006 at 9:01 am #180290
    gegsy
    Participant

    Re: Whirlpool ADG 934 wh/3

    :wave: 😆

    June 28, 2006 at 2:28 pm #180291
    maltheviking
    Participant

    Re: Whirlpool ADG 934 wh/3

    Thanks peeps i’ll give it a go 🙂

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.