Whirlpool ADG644 not heating

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADG644 not heating

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 2, 2011 at 9:00 am #62532
    telemek
    Participant

    Anyone got any ideas on this dishwasher, fills and goes through wash cycle then empties but does not heat at any part of cycle (element and cutout ok). Light flashes 3 times at end. ❓

    May 3, 2011 at 10:09 am #350376
    nigegt
    Participant

    Re: Whirlpool ADG644 not heating

    Broken wiring in the door very common on these where it constantly bent and straightened from opening and closing the door. Take door panel off and examine each wire and repair as necessary.

    Nige

    May 4, 2011 at 8:30 am #350377
    telemek
    Participant

    Re: Whirlpool ADG644 not heating

    Thanks nigegt, checked wiring, you were spot on, broken wire at bottom of door going to heater, working fine now. Many thanks

    May 5, 2011 at 8:46 am #350378
    nigegt
    Participant

    Re: Whirlpool ADG644 not heating

    Cool! 😀

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.