WHIRLPOOL ADP 4732 AL DISHWASHER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WHIRLPOOL ADP 4732 AL DISHWASHER

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 7, 2007 at 11:39 am #27937
    comptonappliances
    Participant

    APPLIANCE FILLS THEN STARTS TO WASH THEN THE WASH MOTOR KEEPS STOPPING AND STARTING AND I GET A LOUD CLICKING NOISE FROM THE PCB ON THE LEFT HAND SIDE OF THE FACIA PANEL AND IDEAS WHAT CAN CAUSE THIS I SUSPECT FAULTY RELAY ON PCB BUT ANY OTHER SUGGESTIONS WOULD BE WELCOME THANKS

    June 7, 2007 at 2:56 pm #216165
    DentedPorsche
    Participant

    Re: WHIRLPOOL ADP 4732 AL DISHWASHER

    Flooded base or Askoll wash pump.
    Shorting out of the askoll pump was a common fault. Had quite a few pulsing due to flooded base.

    Brian

    June 7, 2007 at 5:23 pm #216166
    comptonappliances
    Participant

    Re: WHIRLPOOL ADP 4732 AL DISHWASHER

    thanks thats great will check when i return

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.