whirlpool ADP 5966 No Dry cycle?

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › whirlpool ADP 5966 No Dry cycle?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 22, 2006 at 1:11 pm #16564
    tlc114
    Participant

    Wondering if anyone can help.
    I’ve had this dishwasher for a couple of years now and all has been well. Recently i have noticed that when the machine gets to the dry cycle it fails to complete it. Fan shuts off after about 3 mins but counter carries on down from 15 mins. It now appears that the fan does not start at all!!
    any ideas?
    many thanks

    March 22, 2006 at 2:40 pm #170492
    Dave_Conway
    Participant

    Re: whirlpool ADP 5966 No Dry cycle?

    The fan motor is controlled by the PCB so it will be one or the other I would imagine..

    I guess there’s no error codes being displayed ?


    Dave.

    March 22, 2006 at 3:38 pm #170493
    tlc114
    Participant

    Re: whirlpool ADP 5966 No Dry cycle?

    No error codes at all, and the timer clock still runs down from 15 mins to 0 mins.

    March 22, 2006 at 5:08 pm #170494
    Dave_Conway
    Participant

    Re: whirlpool ADP 5966 No Dry cycle?

    Then the fan motor is most likely I would say.

    Engineer time in all honesty on one of these, check the repairs@ link below 🙂

    If you do decide to have a look, remember to power off :zap:

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.