Whirlpool ADP4501/5

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADP4501/5

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 19, 2011 at 5:35 pm #60332
    geoff1
    Participant

    Hi

    Cannot get this dishwasher to stop draining and eventualy coming up with the start light flashing 4 times. 😥

    Have cleaned the float switch and its housing. Microswitch is working ok.

    During the mant times of trying today twice it started to fill but if I stop it and start again it will just drain. 😕

    Any ideas please

    Geoff

    January 19, 2011 at 5:50 pm #341830
    chezza
    Participant

    Re: Whirlpool ADP4501/5

    I would check the black grid in the filter sump ( level switch ) .boiling water and a toothbrush , then flush through a few times .

    January 19, 2011 at 5:54 pm #341831
    geoff1
    Participant

    Re: Whirlpool ADP4501/5

    Hi

    Have tried this even to the extent that I have had the pressure switch removed and cleaned. while out check operation including microswitch

    Geoff

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.