whirlpool ADP903 d/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool ADP903 d/w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 16, 2010 at 10:54 pm #52564
    Galway
    Participant

    hi
    called to this today and it will fill and do cold rinse then empty and fill again and wash for about 10 min and empties then the start light flashes constantly.is this the ntc or could it be the element as i did not have time to check as customer was going out.
    thanks

    February 17, 2010 at 12:04 am #312286
    Penguin45
    Participant

    Re: whirlpool ADP903 d/w

    Constant flashing is F1 – ntc failure. Could be dodgy connectors, but it hasn’t happened for me yet.

    Chris.

    February 18, 2010 at 4:12 pm #312287
    Galway
    Participant

    Re: whirlpool ADP903 d/w

    thanks

    February 22, 2010 at 8:26 pm #312288
    Galway
    Participant

    Re: whirlpool ADP903 d/w

    replaced the ntc but no joy i cant find anything else wrong with it so i suspect the board?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.