whirlpool american style f/f

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool american style f/f

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 2, 2009 at 1:04 pm #46779
    mackos
    Participant

    Hi I posted a query on this a little while back no feed back unfortunately.Anyway I got the customer to order a new air diffuser (from yourselves)which I installed it did have a different connector block to the original 1 side 2 connectors the other side 3 connectors I used the 3 way as that was the same as the original & it duly closed as i was fitting it,all went well with the temp in the fridge for 4 days but now it refuses to open.Is it poss to put this m/c in a self diagnostic mode like the whirlpool/kenwood models to see if it’s the diffuser,thermistor or board fault.The model no is FRSS2VAF20/0.Hope one of you lads can help.Mack.

    July 16, 2009 at 12:47 pm #290870
    kwatt
    Keymaster

    Struggling with this one, I can find the parts list but I can’t find any technical info.

    Can any of the Whirlpool guys shed a bit of light?

    K.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.