Whirlpool automatic part no

[bonzaco]

Can anyone post me the part number for the timer knob and indicatior dial for a Whirlpool WM325 (i think) product code 37615994 0206 Many thanks – Bonz

[johnmac11]

Re: Whirlpool automatic part no

There are two versions of this appliance with different knobs and indicators.

If the12nc is 857032515000 then the part no’s are 481941258517 for the knob and 481241318203 for the indicator.

If the12nc is 857032515010 then the part no’s are 481941258754 for the knob and 481941379239 for the indicator.

John

[bonzaco]

Re: Whirlpool automatic part no

Thanks John – This machine is abit of a wreck but Im doing it for a mate could you advise where I can find the nc code??

[johnmac11]

Re: Whirlpool automatic part no

It is either on the label attached to the inner door frame or on the back of the appliance along from the water valves you will see the 12nc code and the serial no above some barcodes

John

[Penguin45]

or under the kick panel on some
penguin45

[Dave_Conway]

Re: Whirlpool automatic part no

The other way to tell, if the model number is still apparent anywhere is the 857032515000 is model AWM325 and the later version 857032515010 is AWM325/3.

May I also ask Bonzo why you need those parts, if the timer knob is spinning freely and not engaging with the timer (very common fault) it is a small part behind the timer knob part number 481241318198, which is the same for virtually all the AWM range.

I may be assuming incorrectly of course though. If all else fails, post me the timer knob (if not missing) and I’ll see if I have anything among the vast collection of Whirlpool odds and sods I have here.

Dave.

[Author]

Posts