- This topic has 1 reply, 2 voices, and was last updated 15 years, 3 months ago by
.
-
Posts
-
Hi,
My Whirlpool washing machine has developed a noisier than normal spin, at the end the clothes come out wetter than normal. I can only describe the noise as if the washing machine is vibrating. However the drum looks stable and the washing machine has no movement.
If I put the machine onto a spin when it’s empty it’s fine. With any clothes, half load/full load the problem persists.
I’ve checked the counter weight and it appears to be securely attached.
At the end when the program has finised I can put the washing maching into a spin only program and the clothes come out dryer i.e. normal but the machine is still noisey.
Many thanks.
Re: Whirlpool AW0/D 4605 noisey spin + wetter clothes.
have you checked the drum bearings ? grab the drum 12 o clock and 6 o clock position s and see if there is play in it any movement up and down here and its bearings , other than that if the clothes are wet its not getting rid of the water during the spin , check the filter isnt blocked or drain hose kinked and check the suspension arms at the bottom of the drum are ok and the springs at the top are ok also turn off power and unplug machine before attempting investigations
- You must be logged in to reply to this topic.