Whirlpool awg502 door problem

[hobobell]

The door to my washer/dryer has decided it will only close properly when it wants to. A good nudge use to fixed it but it is now dead. The latch/lock is not hooking!!

Is this something i can replace myself?

Thanks for the help

[Dave_Conway]

Re: Whirlpool awg502 door problem

Could you check that model number please, it’s either very old or incorrect 😉

Dave.

[hobobell]

Re: Whirlpool awg502 door problem

It does exist!!!

Its in the flat i rent so will be at least 5 years old.

[Dave_Conway]

Re: Whirlpool awg502 door problem

I wasn’t doubting the existence of the appliance but the model number does not exist, it’s incorrect I’m afraid.

Dave.

[hobobell]

Re: Whirlpool awg502 door problem

First Dave, re read my post and it does sound a bit offish, sorry.

Now for the humble pie you are correct the model is awg 320/2.

If i have not brunt all my bridges any advice?

[Penguin45]

Re: Whirlpool awg502 door problem

Almost certainly a door lock failure. P/no 4819 280 48012 – there is I think a pattern alternative which might save a few bob – Dave’ll know! He’s always right, BTW. 😀

Regards,
Penguin45.

[Dave_Conway]

Re: Whirlpool awg502 door problem

I think there is a pattern one as well as the appliance is made by Merloni so essentially it’s a Servis in disguise 🙂

But, the Whirlpool one appears to have 5 terminals and the alternatives only the normal 3 😕

If you are going further to investigate yourself hobobell (with the power off :zap:) can you confirm please.

No offence taken by the way 😉

Dave.

[hobobell]

Re: Whirlpool awg502 door problem

Three it is.

[Dave_Conway]

Re: Whirlpool awg502 door problem

Sorry for the delay, it took a bit of time this one but it’s now in the shop

here 😀

Dave.

[hobobell]

Re: Whirlpool awg502 door problem

Cheers Dave, I have ordered it.

Thanks for your help.

[Author]

Posts