Whirlpool AWM049 no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWM049 no go

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 25, 2010 at 9:53 am #56783
    iadom
    Moderator

    12NC. 857002915907

    Did a search but couldn’t find anything specific.

    Customer complained that timer knob had been sticking, she manually advanced it once or twice and it seemed to complete.

    Now the door will lock, the timer whirrs for a few seconds, the drain pump kicks in for a short while then cuts out.

    No fill, no motor action, nothing.

    First thought was motor brushes but they are like new, motor, heater, valves all check out electrically in every way.

    Stumped now. 😳

    Any suggestions?

    Jim.

    August 26, 2010 at 5:22 pm #328833
    iadom
    Moderator

    Re: Whirlpool AWM049 no go

    Cough… 😉

    August 26, 2010 at 7:07 pm #328834
    johnmac11
    Participant

    Re: Whirlpool AWM049 no go

    You have checked all the obvious faults there Jim so it can only be the timer. Before you buy one check the harness to the motor, they were known to have dodgy connections next to the plugs.

    John

    August 26, 2010 at 9:22 pm #328835
    iadom
    Moderator

    Re: Whirlpool AWM049 no go

    Thanks John, I did look at the motor plug connections and they did seem OK.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.